In the spacious halls of the shops of household appliances, there are a lot of washing machines. They have a different design and functionality, and each of them looks modern and aesthetically pleasing, promising to become a faithful assistant for washing. And you have to puzzle over the choice, deciding, for example, which washing machine is better – with front or vertical loading. Without testing the models in action, it isn’t easy to know which one will be more convenient to use, while perfectly washing the laundry and saving electricity. Well, and in the service cut, you want to look. Let’s see how the CM differs with different types of boots and which one is best to choose from.
Device and design differences Top Load Vs Front Load Washing Machines
Any automatic washing machine can be either front or vertical. The latter is different in those things for washing are put on top. To do this, the top cover is reclined, and the linen is loaded into a special hatch, available in the drum. During washing, this hole should be closed.
The frontal type of washing machines involves loading dirty things (and unloading washed) through a special hatch. It is on the front plane of the washing machine.
Both professionals and ordinary users do not find cardinal differences in the quality of washing with these two types of machines. That is, the main mission and both devices perform in good faith. So it is too early to conclude – first, we compare the pros and cons of different types of washing machines.
Dimensions and required space
Frontal models are more versatile, as different dimensions can be produced. But it should be remembered that you need to provide free space to pull out and load things in front of them. Conventionally, such as g.
Vertical washing machines are not different in size. They are 80 to 85 cm high, 60 cm deep and 40 cm wide. And the good thing is that they do not need an extra place when loading laundry and opening the hatch. After all, the underwear is put on top – it is enough to lift the top panel or open the lid on the drum.
So in a small apartment, such a machine can be just a godsend – because it can even be squeezed somewhere in a corner, tightly attached to the wall.
What is the difference between model hatches with different types of loading
Immediately note that neither the look nor the drum design, for the most part, does not have a significant impact on the quality of washing and pressing. However, by comparing washing machines with front and vertical loading, you can determine which model is best for your home or apartment.
Luke in front-facing cars
They have a hatch (diameter from 23 to 33 cm) is closed by a plastic or metal door with a glass window. During washing, a special lock firmly fixes it in a closed position. And only when the program is complete can the door be opened (the automatic lock will be unlocked). For the convenience of using the machine, the hatch’s size is important – in a large hole, it is easier to put and get laundry. It is also important how wide the door can open – simple models can have an opening angle of only 90 or 120 degrees, and more “advanced” – 180 degrees.
The rubber seal, called the maintenance hole cuff, fits snugly around the perimeter. The lack of gaps and quality material does not allow a drop of water to flow out. There is an opinion that the rubber cuff can break quickly, but it is not. It can be damaged, of course, but it usually happens when the device is extremely sloppy.
Luke in vertical cars
Washing machines loaded from above can be constructively different from each other. Most often there are models with a drum located horizontally. On the sides, it has two symmetrical shafts on which it is fixed. A particular demand is such a design among European (especially French) consumers. And Russians also often buy such models. Loading and unloading laundry in them occurs in two receptions: first opens the outer hatch, and then – the drum.
The drum provides sash with a simple mechanical lock. Just not always after washing these sash are in front of the hatch – this often sins simple models. Manually cranking the drum to the right point – a pleasure small, and the developers took this into account. The more expensive new models are equipped with a “drum parking system.” This means that after stopping the drum will always be sashes facing the hatch hole.
Less common in our country, “American” models of large volume, allow you to load 8 – 10 kg of dry laundry. They have a drum that stands upright, no hatch, but in the middle is a special activator. There are also “Asian” models, which are also not accustomed to us. They also have a drum not horizontal, and vertical, but its volume is small. Often such devices are equipped with a generator of air bubbles, helping to wash cleaner. At least, that’s what manufacturers say.
Very convenient is the fact that the machines with vertical loading, at any time you can suspend the wash to add things. And the water will never pour on the floor – because the lid opens up. This option will be useful to thrifty homemakers, who can first put dirtier things, and then – less soiled. It will take less time and powder and electricity.
Which machine is more practical and easier to use
At the front devices, buttons and touch elements are on the front panel – in the same place as the hatch. Many models have a liquid crystal display. On the left side of the same panel is mounted dispenser, which has three compartments. In one of them, the powder is poured, in the other, a liquid laundry agent is poured, and in the third, you can add an air conditioner or rinse. The dispenser is easily pulled out, so there are no problems with its cleansing.
The upper horizontal plane of this type of typewriter is not equipped with buttons or sensors. Therefore, it is quite possible to use it as a shelf, putting the household’s necessary things. If such a device is put in the kitchen, it is usually mounted under the countertop. So the hostess gets an additional working plane. Therefore, in the kitchen room front models can be found more often than vertical models.
Vertical CM controls can be located differently. Some of them are all placed on the top panel-cover, others are on the sidebar. The dispenser is usually in the same place – under the lid. The downside to using such units is that the cover should be free to access. Therefore, neither a cavity these typewriters can serve nor under the countertop can not be built. However, there are other options for embedding them in furniture – with an open-top panel.
Which unit won’t ask for repairs any longer
And in reliability, which is a better washing machine – vertical or front? For some reason, many believe that devices with front load can fail and break more often than vertical typewriters. Like, the drum, which is attached only to one shaft, vibrates more. Accordingly, the bearing of this shaft carries large loads, so quickly wears out. All this is not true – if the machine is qualitatively assembled, it will not over-vibrate, and its parts will not require replacement for a long time. In any case, laboratory tests have produced just such results.
On beauty and ergonomics
According to experts and the vast majority of buyers, the design of front-facing washing machines is diverse and interesting, and they look very profitable. And the process of washing, observed through a transparent window of the hatch, tightens and captivates. Besides, many forgetful people contemplation of washing also benefited. They had time to see in the whirlpool of swirling underwear their passport left in their pocket, a bundle of bills or rights, which can be extracted in time.
Let’s sum it up and make the final choice.
Before you go to the store to dislike the model machine, decide where it will stand. Maybe you want to embed it in the furniture – then you need to make accurate measurements. However, for a stand-alone device, too, you should outline the right space.
Also, consider the following nuances:
- Is it planned to use the machine as a shelf or a working plane;
- Whether you will need to put new portions of laundry during washing;
- Whether you need a viewing hatch, allowing you to see in detail the process of washing.
Small apartments often do not allow to place in the front car. There is not enough room for opening the door, and it does not fit in width. In this case, choosing a model with vertically loaded underwear can be a good way out.
If we are talking about embedded technology, then, as mentioned, the model with front load is better.
Now let’s cover the issue of security. Vertical units lead here. However, leadership is rather theoretical. It is based on the fact that water can not accidentally result from such a machine. But the presence of a hatch on the front of front devices – a risk zone.
After all, there is a possibility (as the practice has shown, insignificant) that it will depressurize, and the water will spill out on the floor. And when such a unit is broken, you must certainly wait for the master to arrive – you can’t open the hatch yourself. If the machine breaks with vertical loading, you can safely open the lid and get things.
Then there’s the price. In front models, it is significantly lower. Their design is more diverse, and the dimensions are for every taste. Therefore, among Russians, they are more in demand, occupying up to 85% of the market.
European and African countries also mostly buy them, but Americans prefer vertical loading. In Australia and Asia, both types of machines are sold in roughly the same way. However, it does not matter whether you will choose the vertical or front washing machine for the quality of washing. Both of them are doing their own thing perfectly. After all, these technologies have now reached considerable heights