Top 10 Best Solar Panels For Home in India (2021)

For the past 20 years, many people have been campaigning for the switch to green and renewable energy. Indeed, the fossil is almost in its last days. It was imperative to find an alternative that was less harmful to the environment. This led to the appearance of solar panels. There are two types of solar panels: monocrystalline and polysilicon. These are actually the characteristics of the cells that make up the photovoltaic surface. The first, being the most efficient and expensive, consists of a single block of molten silicon. On the other hand, the second, cheaper, consists of several cells. Wondering how to choose the best solar panels of 2021 then pushes us to dwell on these two specimens. A panel alone is not enough to produce energy on a regular basis, you have to buy several. They come with accessories such as an accumulator and a regulator for total battery life. While some models like Dokio Solar Panel 100W 12V Mono will guarantee increased efficiency despite the relatively low degree of sunshine. Others will be able to highlight their solidity for sustainable use and this is the case in particular of the Ecoworthy monocrystallin 60W 100 W 12 V Solar panels.


Best Solar Panels in India for Home Use in 2021

Loom Solar Panel 375 Watt – 24 Volt Mono PERC

Loom Solar Panel 375 Watt – 24 Volt Mono PERC

Performing, the equipment does not need to be installed under the sun 24 hours a day to provide power. Despite the formation of clouds, it recovers enough energy to cover your electricity needs. With 100W power, it efficiently recharges your battery and keeps your internet box, tablet, LED lighting, smartphone and more running.

This panel is of the monocrystalline type guaranteeing good performance, regardless of the season. It provides a high rate of energy conversion, regardless of location. Even if you install it directly on the ground or on the roof, it remains effective as long as it is exposed to natural light.

Compared to its competitors, this equipment has a long lifespan, thanks to the quality of its manufacture. Its frame is designed in lightweight aluminium, but strong enough to defend against rust. Its featherweight of 7.5 kg facilitates its handling, transport and assembly.

Best of all, this product has tempered glass protection that accentuates its robustness. As the brand asserts its durability, it offers 25 years of warranty for all buyers, which is equivalent to 4 times on conventional panels on the market.


Unchangeable yield: Even if clouds may hide the sun, this does not prevent the device from providing energy. In addition, it does not require a specific location to assume its roles.

Enough power: From 100 W, this single-crystalline panel is able to cover household electricity needs. It helps you save money by reducing energy bills at the end of the month.

Durable item: With its quality finish, it stands the test of time without losing its performance. Its aluminium frame promises a high robustness.

Practical to use: As its manufacturing materials are discernible by their lightness, this reference is not only easy to handle, but also to install.

Load controller not included: To benefit, you are required to purchase it on a unit basis, since the brand does not add it to the package.


Luminous 325 Watt/24V Poly Crystalline Solar Panel

Luminous 325 Watt/24V Poly Crystalline Solar Panel

The Solari enjoy solar has been designed with 4 high-quality solar cells to offer a maximum power of 150 W and a voltage of 12V. It is therefore ideal for powering small appliances.

This solar camper panel features an ESG tempered glass surface with a weatherproof coating. As a result, he is not afraid of high temperatures or rain. You will be able to install it outdoors at any time. In addition, the frame is made of anodized aluminium and does not rust. Its longevity will then depend solely on how you maintain it.

Moreover, this item is ideal for a trailer assembly, or even in the garden. Indeed, with dimensions of 146 x 66.4 x 3.5 cm, it will easily find a place on the roof of your Mobil home. You can also put it in the middle of your plants, without it being visually cumbersome.



Compact: With measurements of 146 x 66.4 and 3.5 cm, the SolarV enjoy solar will take up as little space as possible.

Performing: Offering a maximum power of 150 W and a voltage of 12V, this item is capable of powering small appliances in your caravan.

Sustainable: This solar camper panel has good resistance to the vagaries of the climate. So you won’t have to worry about its longevity.

Short cord: The transfer cable of this 12v solar panel has a length of only 90 cm. It is therefore not suitable for installation on the roof of a house.


AWCRE – 330W, 24V Polycrystalline Solar Panel

AWCRE – 330W, 24V Polycrystalline Solar Panel

Looking for a product supplied with a multitude of kits to purchase? This solar panel model could quite suit you. Indeed, beyond the panel, you will find in the lot a large range of accessories that can only be of great help: battery clips with a cable that measures 2 m, a solar charger LCD 20 A controller and a single solar panel 60 W. Robust and waterproof, its frame has been designed with aluminium that will guarantee you use on a large temporary range, even up to 20 years.

Similarly, for good performance, it also incorporates a light sensor that is ideal for periodic discharge systems. In addition, this product will be able to protect you from possible short interior circuits, open circuits or overloads.

In addition to the fact that this product will allow you to save electricity, it is also displayed at a price that remains accessible to all exchanges. However, to get a better return, always think about the ideal location that might suit it.



Accessories: This product comes with all the accessories it needs to work: battery clips, a 20 A LCD solar charger controller and a single 60W solar panel.

Robust: The reliability of this product is supported by its solid frame made from high-quality aluminium.

Controller function: In order for you to use this panel safely, the controller function has been integrated into the model. This will allow you to keep an eye on open or integrated circuits.

Defective product: Although the case cannot be generalized, some users have complained that they have received a defective product.


Galo Energy Solar Panel 390 W with 24 V and 72 Cell Mono Crystalline 

Galo Energy Solar Panel 390 W with 24 V and 72 Cell Mono Crystalline 

For a total weight of 7.5 kg, this product is still easy to assemble. It comes with a complete kit that includes: a solar panel, a charging regulator, 2 pairs of cables with MC4 connectors and 4 mounts that will allow you to install it on the roof, on your boat, a caravan or a car. Moreover, given all the elements that Renogy wanted to insert in the pack, it is easy to understand why the device is displayed at a very expensive price compared to other models in its category.

But it’s not just the accessories to justify the price, performance and energy rate delivered by the device are points that can also help raise the price, because it can be said that the whole meets the highest expectations of users. Indeed, the panel is able to produce 1000 Wh of energy during summer periods and it can even go beyond this figure when the sun is at the rendezvous.

Better yet, in winter it will be highly resistant to wind loads of 2400 PA and snow loads of 5400 PA. And to make it easier to use when you need to make product reviews or adjustments, it’s equipped with a battery indicator and a PV indicator.



Accessories: As soon as the product is received, you can directly consider installing and using it, as it comes with an arsenal of accessories.

The energy produced: This panel can offer you an average of 1000 Wh, a value that is likely to increase as to go down according to the whims of time.

The price: Of course, the multiple features inherent in this product can only affect the price at which it is displayed.


AWCRE – 200W, 12V Polycrystalline Solar Panel

AWCRE – 200W, 12V Polycrystalline Solar Panel

This German brand has multiple models of solar panels with different powers. One of its most popular variants is the Offgridtec Gmbh 20 W with a rated voltage of 12 V. Operated at maximum capacity, its intensity is rated at 1.12 A. To get a direct current, simply use a specific converter.

With this power, it cannot be used for machines or appliances that consume a significant amount of resources, such as a television or refrigerator. However, thanks to its monocrystalline plates, the device displays optimal and consistent performance. They also benefit from a coating that protects them from snow and rain. The item comes with other accessories such as the accumulator or power regulator so that it can be used as soon as it is received. However, it will be necessary to obtain electrical cables that are not included in the package, but easy to find on the market.

As usual, the German firm sets aside the aesthetic aspect to focus on solidity. Indeed, all variations of this series are reinforced with an aluminium frame. However, given its small surface area, it will have to be steered correctly according to the weather. It is especially recommended for charging batteries or also for lighting.


Excellent battery life: Even late in the afternoon, this solar panel can still be used to refuel a smartphone battery or laptop. Its 12V regulator makes it compatible with many devices and machines.

Beyond the threshold indicated: Even if its average voltage of the current it generates is 20 W, under a tapping sun, it manages to reach even 90 and 100 W.

The counters

It depends too much on direct sunlight. It is often necessary to move it as needed. Its capacity decreases considerably under cloudy skies.


Loom Solar 180W Solar Panel (Pack of 2) with Panel Stand

Loom Solar 180W Solar Panel (Pack of 2) with Panel Stand

The Best Solar Tubes Harpes is a solar thermal panel that was designed for the production of sanitary hot water. As a result, it has a system with forced circulation, with an area of 2 m2. The speed it offers is 40 l per hour. With this article, you will no longer need a water heater.

Indeed, it will perform this function in its own way to guarantee you the necessary comfort during the shower. Practicality is therefore an essential point when you are wondering which solar panel to choose. In addition, this model features a highly selective capture plate made of copper and Tinox titanium welded by ultrasound. Thanks to this, it has a good absorption capacity.

It’s also flexible, because by properly sizing the collectors, you’ll get equipment that will meet your particular needs. You will then be able to adapt it to the number of people present in the house.



Convenient: This solar thermal panel has collectors that don’t require maintenance, so you don’t have to climb on the roof regularly.

Durable: According to the test carried out on this model, it is perfect weather resistant. He is not afraid of rain, hail or even snow.

Adjustable: By taking into account and sizing the number of collectors, you will have the opportunity to adapt this specimen to your needs.

Expensive: According to some consumer reviews, the price of this specimen is somewhat high. This retains some prospects for its purchase.


Loom Solar 180W – 12V Mono Crystalline Panel

Loom Solar 180W – 12V Mono Crystalline Panel

The particularity of the RAVPower brand lies in the design of the portable solar panel and foldable like this 16W variant with a 5V voltage. It is easy to understand, therefore, that it is intended for people who are looking for the best solar panel for their travels or trips. It is therefore especially practical for long trips by car or boat.

For its shaping, the brand has used SUNPOWER’s recent technology® which is summed up in high-capacity silica cells that generate a much larger than average amount of energy (over 20% or even 25%). The product can be connected directly to any device with a USB connector. The current produced is regulated by an iSmart microprocessor, an integrated circuit set, which adapts to the voltage and intensity needs of the connected device.

Its shape and finesse are one of the key assets of this model. It weighs no more than 450g and fits easily in a small compartment such as a glove box or bag. To compensate for its fragility, it was coated with a transparent canvas made of polyester.

Although it is best to attach it properly to support, it captures light even when slightly bent.


Excellent design: Unlike other competing brands, RAVPower does not neglect the style especially with a well-chosen colour.

Waterproof: In general, all solar panels are waterproof. However, this model still has a waterproof fabric to protect it completely from the weather.

Intelligent charging system: There is no risk of discharge or overload with its built-in circuit that keeps the current at the optimum level.

Overheating: Although it adapts to the specifics of the device connected to the USB port, it tends to heat the latter because of the fast charge.


Luminous 160W – 12V Poly Crystalline Solar Panel for Home

Luminous 160W – 12V Poly Crystalline Solar Panel for Home

Offgridtec’s GmbH series is also available with 100W power with a maximum voltage of 12V. This can vary from 11 to 13 V depending on the weather. Being much more powerful compared to the previous one, it is capable of powering most of the devices that are usually used in the home such as television or all lighting.

With this small model (54.0 x 120.0 x 3.5 cm) for a weight of 8 kg, the buyer will have no particular difficulty for his transport and installation. Like most of the latest copies, it attaches easily using screw holes located on each corner provided it is placed in a fairly stable and flat place.

Its silicon sensors are monocrystalline, which ensures a better, immutable performance, regardless of the season. Also, it can be installed anywhere, on the ground, as long as it is sufficiently exposed to light. It is advisable to buy several that will take turns as the sun changes position.

All items in this company have undergone more than one pre-test before going on sale. The chances of a failed prototype being failed are minimal.


High-quality isotope cells: Offgridtec monocrystalline plate variants rarely disappoint. Indeed, it lives up to consumer expectations with its potential for energy production and transformation.

German technology: German companies are renowned for their high-end masterpiece with good longevity. Well maintained, this sign will still plague you even after ten years of use.

Slight decrease in diet: However, there is a decrease in load on days when there is not too much sun. In winter, it actually reaches only 90 W.


 Galo Energy BIS Certified Solar Panel 160W

 Galo Energy BIS Certified Solar Panel 160W

A flexible solar panel, the Giaride 12V is suitable for use on a curved surface at a maximum of 30 degrees. This ranks him as the best performer of his generation. You can put it on the hood of a car, on the roof of a house or caravan, but also on a boat.

Moreover, the manufacture with a single cell laminated in a thin film guarantees resistance to water, but also to dust. In addition, it supports snow and hail. You won’t have to worry about bad weather and can use it in any season.

With dimensions of 119 x 54 x 0.25 cm, this solar panel campervan is transported safely. You can also easily find a storage space, whether to hang or to lay on the floor. In addition, this design is ideal for assembly, as it installs with glue, tape or Velcro. Of course, it must be compared with other specimens to determine its strengths.


Flexible: The Giaride 12V is a flexible solar panel that can be placed on a surface with an angle of up to 30 degrees.

Resistant: Thanks to its manufacture, this model can withstand rain, dust, hail, but also snow. Bad weather will not be a problem, no matter what the season.

Compact: With dimensions of 119 x 54 x 0.25 cm, it fits easily and can be transported safely.

Without accessories: It is a pity that this item is not delivered in kit. It is therefore necessary to obtain certain items separately in order to be able to use it.


Microtek Solar Panel MTK 150W 12V

Microtek Solar Panel MTK 150W 12V

The use of solar panels is now an excellent contribution to the preservation of the environment. And this pool model illustrates the wonders of green energy development. No need to go through another appliance to warm the bath, all it takes is exposure to the sun. Because this panel was designed precisely to regulate the temperature of the water in order to achieve a pleasant swim and in the right conditions, anywhere.

In particular, cold snaps are not included in the directory of this system, given its high efficiency. Even with a water flow of 2000 litres per hour, you are not at all likely to damage your equipment. The panel itself already looks large enough on its 6 x 0.7 meter dimensions, and robust enough to withstand shocks.

On weight, one weighs around 10 kg, which is a smaller detail if we refer to all the advantages it confers. In addition, connections can be made on several plates provided you have enough accessories and preferably compatible with the model. Therefore, it is quite possible to connect 2 or more plates to meet a given temperature, and depending on the size of your above-ground pool.

With a water capacity of 20 m3, it will surely not take you long to heat your improvised basin, especially since the device provides the best results to the conditioning. Note here that this material is added after filtration.


Easy to install: A number of users appreciated the simplicity in the process of setting up the panel and the various fittings.

Economical: No power consumption is required to make everything work, you only need sunlight.

Good value: After taking a look at the features of this model, we must recognize its very affordable price.

Poor-fitting quality: Already, users have noticed the configuration that could give way over time. It would also appear that the fasteners, obviously, are not provided with the lot, and do not hold.


Buying guide

Well done! If you’re reading these lines, you’re interested in renewable energy, especially solar panels! Yes, the planet needs a gesture from you. The move to a clean energy source is particularly valuable. So if you’re looking for ways to buy a better value solar panel, you’re at the right address.



Be aware that a solar panel is a set of photovoltaic cells that each produce around 0.5 volts. Understand that you should choose the surface of your solar installation based on your energy needs. However, a good buying guide for the best solar panels should explain that the type of materials that make up the cells will have an influence on electricity production.

Some models are small, but still provide enough power. This is the case with monocrystalline silicon panels. They offer up to 22% yield, but this performance drops when the sun is overcast. Conversely, amorphous silicon equipment continues to work, even with diffuse light. The only downside is that they have a yield of 6-10%. This requires a larger area. Consider the sunshine in your area.



Before you look for a new solar panel, you should start by calculating your average electricity consumption. The power of the installation will depend on it. According to official reports, a French household consumes around 3500 kWh/year. If you intend to cover this need with solar energy,it will require a significant investment. It would be best to count according to the number of devices you have and their consumption.

Example: Combine the power of the television, lamps, laptop and small refrigerator. Divide by 1.5 the amount obtained. This will be the ideal power for your solar panel. Expert advice recommends Maximum Power Point Tracking technology. With an MPPT product, the yield is close to 30%. This means that the 1000 watts/m2 courtesy of the sun is converted into a 30% current.


Ease of installation

As much as possible, entrust the installation of a solar panel to a technician. It would be even better if this provider offers a guarantee. That said, there are models that can be installed by you. Some panels do not need to be attached to the roof at all. They will settle for a fairly clear flat surface. The location is optional, but the roof still offers more security.

Imagine the chore if you have to store your panels indoors every night. It won’t be a problem if you’re on a boat. In case you need just a few kilowatt-hours, your needs may be covered by a solar kit. This type of equipment does not use a battery or converter. Devices such as phones, or laptops will be directly charged. If you need a more power-efficient installation, ask an energy supplier instead. Last tip: consult a price comparator if you have any doubts about the investment you need to make.


How do I use a solar panel?

Ecological and economical, the solar panel is a great success. It is widely used both at the household level and at the level of large firms. To take full advantage of its benefits, you would have to know how to use it and know all the tricks that make it even more effective.


The elements of the solar energy system

The electricity generated by this photovoltaic system results from a combination of several elements. Three of them are the most important: photovoltaic plates that collect heat from the sun through radiation, inverters that convert the energy obtained into alternating current and a meter. So you need to have these components when you install your solar panel.


The laying of panels: plural configurations

Solar panels are usually installed on roofs, taking care to steer them south to optimize their performance. This will be how you can enjoy the greatest power of the sun. For fixing, there are several types of installation: on rails attached above the tiles, on a sub-roof screen, or on waterproof receivers. As you will have understood, there are different configurations to choose depending on your roof, or your preferences.


A certain inclination to respect

Apart from the orientation of the plates, it will be necessary to look at their inclination, because it will also depend on their performance. For information, it will be necessary to approach at best an axis perpendicular to the sun’s rays. In general, it is recommended to apply a tilt ranging from 30 to 35 degrees in relation to the horizontal axis. This position is especially effective when the sun is higher and the rays brighter, in other words during the summer. This will greatly reduce the percentage of loss.


Use solar panels directly

With some electronic devices, or even for lighting, solar panels can be used directly. However, use is relatively limited in choosing this process. Devices that are more energy-intensive, such as refrigerators or computers, will not be able to be powered in this way. Indeed, it will be necessary to use batteries to store enough energy. Directly, the power will not be regulated either, and could therefore be either too weak or too strong, which represents certain risks.


Use a battery to store the energy collected

As mentioned above, batteries can also be used to store energy obtained via solar panels. This will allow you to continue to benefit from electricity, even at night when there is no more sun. In this way, you will also be able to power larger devices, because a regulator will stabilize the delivered current, so that the devices can benefit from the right power, no more and no less.

Of course, this system can be combined with direct use. This will allow the solar panels to continue to operate even when the batteries are full.


A hybrid solar panel capable of operating underwater soon launched

Sustainable development obliges, solar panels are very popular power generation devices at the moment. So research to make it more efficient equipment even in the face of obstacles like rain and many others are multiplying. It is in this context that a group of Asian researchers are studying the possibility of designing a hybrid model of solar panel whose particularity will lie in its ability to walk in the rain.

If this innovative project were to come to fruition, it would be a giant step that scientists have taken in their desire to make more remarkable photovoltaic panels available to consumers in terms of performance. Find in this article some information about this technological prowess that its Chinese researchers intend to achieve.


The exploitation of rain energy: the starting point for reflection on the creation of hybrid solar panels

This is known to all, rain is one of the main obstacles to better efficiency of devices to produce electricity such as solar panels. However, this status does not prevent researchers from carrying out studies with the aim of making rain a true ally in the production of energy through these equipments. A lot of research is being done by teams of scientists to transform rain into a real asset for the performance of solar panels by adapting the technology used by them.

By curbing the power generation of a solar panel installation, rain has a negative impact on the reliability of such a system. It is to know the real consequence of this phenomenon that the Association of Solar Energy Professionals of Switzerland carried out a study in 2013. It had one and only objective: to measure the efficiency level of solar panels in the event of rain. And the results of the Swiss body’s investigations were unsurprising.

The study conducted by this association of solar energy professionals revealed that solar panels are down by more than 90% in case of rain. Under these conditions, these devices cannot meet the expectations of users residing in areas with high rainfall. To increase the efficiency of solar panels, it is absolutely necessary to find a way around this obstacle of rain. And it is from this premise that a group of Chinese scientists will undertake research to develop a panel model capable of turning this weakness into strength.


Hybrid solar panel running in the rain: an idea of Chinese scientists

In 2016, a team of researchers from the Chinese universities of Yunnan and the Ocean looked at the possibility of improving the efficiency of solar panels through water. This group of scientists will therefore begin a series of studies on the electrochemical properties of that derived from rain. To do this, these researchers first design solar panels in a material known for its conductivity such as graphene. The properties of this material allow water to adhere to the surface of the prototype made. On this first attempt, a capacitor with two layers produces electrical current thanks in part to a chemical reaction.

The results of this first trial are below the expectations of these Chinese scientists. The various experiments revealed the low efficiency of a rainwater-based device to generate electricity. Faced with this disappointing finding, the researchers come to the conclusion that the idea of designing a solar panel running in the rain is not viable.

They are also confronted with this by the fact that the production costs for such equipment are particularly high, mainly because of the use of graphene, which is still too expensive on the market. All these aforementioned elements would precipitate the abandonment of the project by this group of researchers at the origin of these different experiments. Nevertheless, the idea of developing a hybrid solar panel had just emerged.


Everything you need to know about the 1st hybrid solar panel model made in China

The failure of the first attempt did not, however, chill Chinese scientists in their desire to find a reliable solution to the degradation of the performance of solar panels by rain. The idea of developing a hybrid panel model capable of working even in rain germinates in researchers at the University of Soochow. The team of scientists they make up is based on the principles of TENG. This term refers to the technology of the triboelectric nano-generator, which allows energy generation to be achieved through the friction process of two materials.

With this clarification done, let’s go back to the device imagined by this group of researchers from the University of Soochow. It is a prototype consisting of 3 layers, one of which is textured polymer to play a very specific role. It is used as a common electrode for the solar panel’s silicon photovoltaic cells and TENG. A mixture of two polymers is found between the bottom layer and the base layer. As for the top, it is made of transparent polymer. This feature guarantees the passage of sunlight, but much easier to capture it by photovoltaic cells.

The operation of this prototype hybrid solar panel is this. On contact with the surface of the panel, the friction of the water drops with the top layer promotes the production of electricity. As can be seen, this hybrid model will produce electrical current using sunlight. But best of all, the presence of a protective layer will allow it to function even when it rains.

It is apparent from the analyses of these researchers who observed this test product during its operation that the upper layer of it has the peculiarity of increasing the area in contact with rain. This makes the hybrid solar panel even more efficient. The Team at Soochow University has made all the useful arrangements for industrial-scale production of its hybrid solar panel. We wait for the first models to leave the factories to be able to take advantage of them


The most popular brands

The trend is now towards renewable energy, environmental preservation and recycling. Power outages and the crisis have led to the rise of devices such as solar panels, and on this side we see that Asians are leading the way.

Trina Solar has filed more than 1,300 patents already and has no plans to stop there. The brand aims to make solar energy affordable for all without the quality falling. She has had nearly 20 years to work her products and improve them over and over again in order to satisfy as many people as possible.

The Chinese company has sold more than 23 GW of photovoltaic modules worldwide, proof that its success is still in its infancy.

Ja Solar, another leading Chinese solar energy company, was founded in 2005. But despite the fact that it is still quite young compared to other brands that date from 20 to 30 years on the market, it was quickly able to probe the needs of consumers and respond to them.

What users appreciate most about the firm are its efforts to always seek a fair, but above all affordable value. It is due to technologies such as the high-transparency optimized tempered glass surface not only with more than satisfactory efficiency, but also remarkable robustness. It is also one of the only ones to market black panels, more design.

Hanwha W Cells likes to call itself a solar solution provider and that’s what it is for many consumers around the world. Its diverse collection of solar panels makes it a reliable and choice partner in the home’s equipment to name but a few of its 3rd generation high-quality single-crystalline PV panels.

We also find standard models covering simple needs such as 6-inch solar cells or super square monocrystallines. Many other series remain available in the brand’s product range such as Q.Peak-G3 270 Mono or Q.Peak BLK-G3 265 Mono.

Eco-worthy was born from the collaboration of many solar panel wholesalers and engineers eager to provide complete solar energy equipment to everyone, from photovoltaic panels to different kits and systems for kilowatt needs ranging from 5 W to 1 kW.

The firm exports its products around the world and has forged an iron reputation throughout its years of existence. So if you’re looking for standard solar panels, Wattage, trackers, inverters and load controllers, home and farm appliances, tools and batteries, fans and lighting, solar pumps, wind turbines, installation parts and DIY, you’ve knocked on the right door.

Suntech, one of the leading suppliers of crystalline silicon solar cells and modules, which was created in 2001, is known around the world as a quality vector in the field. Reliability, performance, cutting-edge techniques, these are the striking features found in each of his creations. The firm has sold more than 25 million modules so far, thanks to this.



Q1: How many solar panels are needed for a self-contained home?

The number of photovoltaic solar panels needed to empower a fireplace varies mainly depending on the area available on your roof. On average, a building has 19 to 20 square metres of free space, allowing 12 panels to be installed. Of course, if your property is large enough, you can go up to 16 panels to produce a 280W photovoltaic module.

However, you also need to calculate your electricity needs so you don’t have to buy excess devices. To do this, sum up the power consumed by all your devices. Multiply it with the time of use and divide it by the number of clear days in your area. Also, consider the performance of the solar panel.


Q2: What are solar panels for?

The main function of a cheap or high-quality solar panel is to create electricity. It is suitable for domestic use, but also industrial, depending on the power generated. You will then be able to power all your appliances, provided you have enough energy.

This type of device saves money. By having sufficient power generation, it is possible to supply the area of an entire house and thus reduce bills at the end of the month. In addition, the use of an article of this type is environmentally friendly. Indeed, it is an ecological process, because electricity production is non-polluting. It is a substitute for traditional fossil fuels, which is ideal in the short and long term.


Q3: How do I install a solar panel?

The installation of a photovoltaic solar panel is done in several stages. First, you have to prepare the surface on which you are going to build it. For example, you can remove the roof at the location for the installation. Then put the accommodations in place. This applies to the lower and lateral parts. After that, combine a waterproofing system. A sub-roof would also do the trick. The rails are the following on the list of things to install. Make sure they conform to the size of the panels to avoid redoing everything. And finally, connect the photovoltaic inverter to the grid. In general, people plug it directly into the house meter so that all sockets are supplied with electricity. You can then take advantage of your stand-alone power system.


Q4: How do I clean a solar panel?

Start by getting water at a climate-appropriate temperature to prevent heat shock. Demineralized water will be ideal for maintenance. Water lightly to carry small debris and dust. Avoid high-pressure machines, as this could damage the device.

With a soft cloth, gently wipe the plates to remove the limestone traces. A water will be suitable if you have a large surface to clean. In addition, you should not scratch the parts with stubborn stains. A scratch would decrease the performance of the product. It goes without saying that you should not walk on the signs. Also, consider taking safety measures if you are working on a roof.


Q5: How many solar panels for 6kw?

The number of panels required to obtain 6 kW depends entirely on the power generated by each unit. On average, a device of this type produces between 190 and 195 W. If you do the math, you’ll need 30 to earn about 6 kW. This can be done with 10 rows of 3 columns, 6 rows of 5 or 8 rows of 4.

This obviously varies depending on what the purchaser wants to have. You can buy several models offering different speeds, by buying little by little for example. Of course, you also have to take into account the area of the place on which you will perform the installation and adapt the power of each specimen accordingly.


Q6: How do I plug in a solar panel?

To ensure the operation of a solar panel and to connect several of them, the fitting can be done in two different ways. So there is the serial process that adds up the tensions. To do this, connect the terminal – from one unit to the terminal – another and so on.

As far as the parallel connection is concerned, it is enough to link all the terminals – and do the same for the terminals — . The system chosen also depends on the use and the model purchased.

In addition, for the installation of the photovoltaic inverter, connect the panels to the regulators. The latter must be connected to the inverter which in turn will be connected to your meter. In this way, all the plugs in your area will be supplied with electricity.

  • Leave a Comment